The low-gas consumption blast heat regeneration adsorption dryer belongs to the heating regeneration dryer. Its working principle is to use a blower to extract ambient air, and then regenerate the desiccant in the adsorption tower after heating, avoiding the gas loss of the micro-heat regeneration adsorption dryer in the heating stage. The cold-blowing stage uses post-cooling instead of part of the finished gas, thus saving energy to the greatest extent. It is an adsorption dryer with the "energy saving and emission reduction" effect that conforms to my country's national policy. The regeneration energy consumption of the heating regeneration dryer has two forms, the first is the heat energy required to make the adsorbent reach the desorption temperature and vaporize the water, and the second is the gas used as a heat carrier and cooling medium. In the blast heating regeneration dryer, since the ambient air is used as the heat energy carrier, the compressed air consumption is greatly reduced.
The complete working process of the low-gas consumption blast heat regeneration adsorption dryer consists of four stages: adsorption, regeneration, cold blowing, and pressure equalization. The procedure of the low-gas-consumption blast heat regeneration adsorption dryer requires not only orderly switching of the action sequence of each valve but also control of the heating temperature. If the temperature is too low, the adsorbent cannot be desorbed; if the temperature is too high, the adsorbent is prone to deterioration.
You may like:
| Refrigerated Air Dryers & Desiccant Air Compressors | Industrial Compressor Dryer & Filter Solutions |
| Buy Refrigerated Compressed Air Dryers | Desiccant & Adsorption Dryer Systems with Air Compressor Filters |
| Air Compressor Dryers | Refrigerated & Adsorption Dryers with Filters for Clean, Dry Compressed Air |
| Industrial Air Compressor Dryer Systems | Refrigerated & Desiccant Air Dryers with Filters for Moisture Control |
| Refrigerated Compressed Air Dryer & Desiccant Air Dryers | Moisture Removal Systems for Air Compressors |
| Compressed Air Dryer Solutions | Refrigerated, Desiccant, and Adsorption Dryers with Built-in Filters |
| Shop Air Compressor Filters & Dryers | Refrigerated, Desiccant & Adsorption Dryers for Clean Air Supply |
| Refrigerated Air Dryer for Compressors | Desiccant & Adsorption Dryers with Efficient Air Filters |
| Complete Air Compressor Dryer Systems | Refrigerated, Desiccant & Adsorption Solutions for Dry Air |
| Refrigerated & Desiccant Air Dryer Units | Compressor Dryer with Advanced Filtration for Industrial Use |
Inquiry
Product Description
|
Working conditions and technical indicators |
|
|
Purge Air |
≤1-3% or 0% |
|
Inlet pressure |
0.6~1.0Mpa |
|
Inlet oil content |
≤0.1mg/m³ |
|
Dew point |
-20℃~-40℃ |
|
Standard working period |
8 hours |
|
Inlet temperature |
0℃~45℃ |
|
Power |
380V/50HZ |
Construction Cases
Contact Us for More Details
Don't hesitate to contact when you need us!







Conclusion up front: If you compress air, you need an oil-water separator. If you have one, you need to maintain it. A well-maintained separator protects your ...
View MoreWalk through any plant that runs pneumatic tools, laser cutters, or precision control valves, and you will eventually hear the same complaint: the air line is ...
View MoreAt a petrochemical plant, a sticking control valve, a drifting analyzer, or a slow-acting emergency shutdown valve usually has one root cause: contaminated or ...
View MoreChemical process cooling equipment is not just about making process fluids cold. It is about controlling temperature precisely enough to protect reactors, stab...
View More